RENDEZVOUS AT THE FORT - The Fort Wilderness DISMeet Trip Report October 2020

tiggerdad · Oct 21, 2020

PaHunter said:
This was our arrival to the Fort.

My new favorite YouTube video. My decorations were seen!

jbrostek · Oct 22, 2020

tigger92662 said:
Cummins 350isc, cylinder #4. both snapped off flush at the cylinder head. This is gonna be fun

I had an ISC350 in my 2001 pusher. 3 snapped/drilled out, rest came out with patience.

PS: Learned how to channel my inner cat and fit into spaces no normal human could.

Stork · Oct 22, 2020

jbrostek said:
I had an ISC350 in my 2001 pusher. 3 snapped/drilled out, rest came out with patience.

Curious...can you define "patience"? Were you waiting for some liquid "persuasion" like a WD40 to penetrate or wrench with a cheater attached. I have tried the latter and snapped off the bolt head. Not good.

PaHunter · Oct 22, 2020

Stork said:
Curious...can you define "patience"? Were you waiting for some liquid "persuasion" like a WD40 to penetrate or wrench with a cheater attached. I have tried the latter and snapped off the bolt head. Not good.

WD40 ?? You might as well pour milk on it. Kroil is the best product to bust old bolts. Sold by a company Kano labs, the stuff is awesome. Always have a can or two here. Been using it for 30 years now.

jbrostek · Oct 22, 2020

Stork said:
Curious...can you define "patience"? Were you waiting for some liquid "persuasion" like a WD40 to penetrate or wrench with a cheater attached. I have tried the latter and snapped off the bolt head. Not good.

Lots of that, some heat on the most stubborn. Reverse drill bits and a thread cleaning tap as needed for the broken one and replace all cylinder studs/bolts.

Stork · Oct 22, 2020

Excellent. Knew there was something better out there. Thanks for the info!

bama_ed · Oct 22, 2020

How sad. Our DISMeet trip report has been un-stickied. Now it will float down the page and eventually roll into history.

I updated the table in post #1 (hopefully for the last time) to show who all was actually in attendance.

ED

garneska · Oct 22, 2020

i know i was sad to see it unstickied. Already looking forward to the next one.

PaHunter · Oct 22, 2020

During our trip, I ended up getting a couple of things, we usually do not get.

Had seen BamaEd's and liked it so go one.

This fella came from Yak and Yeti, and is the most resusable of them all, and easiest to clean.

And I found this fella on the way out of EPCOT, and thought he was cute.

We then stopped at Mousegears on the way out of EPCOT and got a t shirt or two, some magnets, and this....

Once it goes together, I am thinking of making it a wall hanging, backing it with the nice bright orange material I have left over, putting grommets in both corners of the fabric. We will see how it goes.

tigger92662 · Oct 22, 2020

Well we may be unstickied, but we'll still keep it at the top.
When we got home sunday, I was parking coach and trailer in the dark & damp, 40 degrees.
This week has been continued rain off and on temps in the 50's.
Last night 1.5" rain. About 1pm today sun came out and beautiful 70 degrees
Unfortunately that was what I was waiting for as it's time for the transfusion of pink liquid into the veins of the coach.
Alas, it was not so terrible as I had 2 unannounced helpers that came home with us.

Problem is I don't know what to do with them. They won't last long up here

tiggerdad · Oct 22, 2020

jbrostek said:
I had an ISC350 in my 2001 pusher. 3 snapped/drilled out, rest came out with patience.

PS: Learned how to channel my inner cat and fit into spaces no normal human could.

Stork said:
Curious...can you define "patience"? Were you waiting for some liquid "persuasion" like a WD40 to penetrate or wrench with a cheater attached. I have tried the latter and snapped off the bolt head. Not good.

PaHunter said:
WD40 ?? You might as well pour milk on it. Kroil is the best product to bust old bolts. Sold by a company Kano labs, the stuff is awesome. Always have a can or two here. Been using it for 30 years now.

jbrostek said:
View attachment 534004

Lots of that, some heat on the most stubborn. Reverse drill bits and a thread cleaning tap as needed for the broken one and replace all cylinder studs/bolts.

FtW Mike · Oct 22, 2020

tiggerdad said:
View attachment 534140

C 4 Strategically placed in large amounts will solve a great number of problems in my experience

Flametamr · Oct 23, 2020

Hey Everyone, Sorry I couldn't make the meet up. Heck I have been so busy I forgot to even keep up here. Things have been crazy for me. I was even on the fence about cancelling our annual Halloween trip. It will take me few weeks to catch up but I hope everyone had fun.

DL1WDW2 · Oct 23, 2020

Well You guys made me feel like it would be fun to drive the Fort last night...it is scary in the dark and felt like there was No Way Out a few times.
But very impressive to see the squeeze into lot for so many.
No turning back & no turning around Words of caution!
Foolish mortals Beware.

PaHunter · Oct 23, 2020

PaHunter · Oct 23, 2020

OK, so where was I when I took this and what ride ??

BenitaN · Oct 23, 2020

Hello Everyone!

I had to catch up and read about 15 pages. So much was going on with our group while I was at the Fort, and I didn't even know it! Who knew I should have been watching this thread. We will be prepared (and contribute) on the next trip.

Thanks so much for making Damien and me feel so welcomed. The potluck and "after party" were by far the best part of our trip.

We can't wait until Tennessee.

PaHunter · Oct 23, 2020

BenitaN said:
Hello Everyone!

I had to catch up and read about 15 pages. So much was going on with our group while I was at the Fort, and I didn't even know it! Who knew I should have been watching this thread. We will be prepared (and contribute) on the next trip.

Thanks so much for making Damien and me feel so welcomed. The potluck and "after party" were by far the best part of our trip.

We can't wait until Tennessee.

Glad you could join us.

tigger92662 · Oct 23, 2020

Tonights meal comes courtesy of @PaHunter & @Teamubr.
Smoked pork tender loin with St. Louis style barbecue sauce in the slow cooker

Even Cody was diggin it

And don't forget Jen's homemade dill pickles

bama_ed · Oct 23, 2020

BenitaN said:
Hello Everyone!

I had to catch up and read about 15 pages. So much was going on with our group while I was at the Fort, and I didn't even know it! Who knew I should have been watching this thread. We will be prepared (and contribute) on the next trip.

Thanks so much for making Damien and me feel so welcomed. The potluck and "after party" were by far the best part of our trip.

We can't wait until Tennessee.

Hey, great avatar picture there, you two!

We hope to see you there in June!

Bama Ed

PS - yeah, something is always going on with this crowd. :rolleyes1

RENDEZVOUS AT THE FORT - The Fort Wilderness DISMeet Trip Report October 2020

I don't always get distracted but whe...SQUIRREL!

DIS Veteran

Mouseketeer

Reasonably Knowledgable Individual.

DIS Veteran

Mouseketeer

It's kind of fun to do the impossible-Walt Disney

DIS Veteran

Reasonably Knowledgable Individual.

They're more like guidelines than actual rules

I don't always get distracted but whe...SQUIRREL!

DIS Veteran

<font color=red>I never thought about doing any ot

DIS Veteran

Reasonably Knowledgable Individual.

Reasonably Knowledgable Individual.

Mouseketeer

Reasonably Knowledgable Individual.

They're more like guidelines than actual rules

It's kind of fun to do the impossible-Walt Disney

Share this page