Someone help with clipart!!

[Rajah*]

I would really like a pic of Jasmine but I cant seem to make it work!! I tryed to follow directions from "A Clipart Primer From Dan Murphy" but I couldn't make it work. What do I do!!

 

[BobBrazeal]

Try this. Here is an example of the code to put into your posts. I've used the address for one of the images of Jasmine from the site in Dans post.

Use this code...

&#91IMG]http://members.aol.com/_ht_a/vltdisney/jasmine01.gif&#91/IMG]

to get...

You can put different urls in there if you like. The url in the above example is http://members.aol.com/_ht_a/vltdisney/jasmine01.gif

 

[Rajah*]

 

[BobBrazeal]

Make sure that the one at the back is spelled right and has a "/" in it.

The one in front is right. It should be &#91IMG]. The one at the end is your problem. It should be &#91/IMG]

 

[BobBrazeal]

See my post above for where your problem was with the last try. You'll have it working here pretty soon. In addition to missing the "/" you have the one at the end as IMC instead of IMG.

You can put that same code in any of your posts or in your signature. It will work either place.

 

[Rajah*]

It didn't work. Did it?

 

[BobBrazeal]

You've still got a &#91/IMC] rather than &#91/IMG] in the one at the end. Fix that and you should have it.

 

[Rajah*]

I DID IT!!! Now I just write that code in my signature box and it will be there every time I write a post??

 

[Rajah*]

I think it worked. I typed the code in my signiture box do you see the pic???

 

[Rajah*]

After I looked at that previous reply the picture did not come on. I went to edit and I had to write the code on the message. How come the code on the signiture did not work?

 

[Rajah*]

I HAVE FINALY DONE IT!!!!!!!!!! I found an error in my signiture. Sorry for all the trouble!! Next time I'll check more carefully. Thank you sooo much for helping me out!!!!!!!!!!!

 

[BobBrazeal]

<marquee behavior="alternate">Good job!!!<img src="http://www.disboards.com/forums/images/smilies/boldpurple.gif"></marquee>

I'm glad that I could help.